Masterflex® C/L® Analog Variable-Speed Pump with Single-Channel Pump Head for Microbore Tubing Pump, 50 to 300 rpm; 90 to 260 VAC
Supplier: Avantor Fluid Handling
New head design provides more positive tubing retention and improved flow performance.
- Separate 1-turn speed control and CW/OFF/CCW switch with green LED power indicator—maintain speed setting when you turn pump on/off or reverse direction
- 'Max' button runs pump at 100% of maximum rpm—use to prime or to rapidly flush tubing
- Reversible permanent magnet DC motor for pumping fluid in either direction
- Remote start/stop control available using contact closure connection on back of the pump
- Pumps accept continuous lengths of microbore tubing for a clean, uninterrupted flow path with no fittings
- Deliver flow rates from 0.06 to 43 ml/min with a wide range of microbore tubing sizes
- Pump runs on 90 to 260 VAC, 50/60 Hz power
C/L® pumps are compact (1⁄4 DIN) and perfect for low-flow OEM use or analyzer applications. These easy-to-use, economical pumps feature reversible pumping, remote control capabilities, and rapid tubing changes. Ideal for consistent fluid delivery in chromatography, spectroscopy, and dispensing applications. These pumps feature self-priming which withstands minor back pressure.
Maximum suction lift of 5 ft (1.5 m); max discharge head of 20 ft (6.1 m); max pressure 15 psi (1.0 bar). Self-priming pumps withstand minor back pressure.
Maximum suction lift of 5 ft (1.5 m); max discharge head of 20 ft (6.1 m); max pressure 15 psi (1.0 bar). Self-priming pumps withstand minor back pressure.
Delivery information: Includes 5 ft (1.5 m) of 0.89-mm ID Tygon® LFL tubing and a dual-voltage (115/230 VAC) power supply with 6-ft (1.8-m) power cord. Pumps are shipped with cord/plug assembly appropriate to destination country. Order additional microbore tubing based on chemical compatibility and flow rate.
Learn more
About VWR
Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...